CBWLY - LR WHITE ACCELERATOR, 17413

  • MSDS: CBWLY
  • Manufacturer: POLYSCIENCES INC
  • Product Name: LR WHITE ACCELERATOR, 17413
  • National Stock Number: 8010-00N067086
Product Identification

Product ID:LR WHITE ACCELERATOR, 17413
MSDS Date:07/01/1986
FSC:8010
NIIN:00N067086
Kit Part:Y
MSDS Number: CBWLY

Responsible Party
POLYSCIENCES INC
400 VALLEY RD
WARRINGTON, PA 18976
US

Emergency Phone: 215-343-6484

Info Phone: 215-343-6484

Cage: 9C365

Contractor
POLYSCIENCES INC
WARRINGTON, PA 18976 US

Telephone: 215-313-6484

Cage: 9C365

Ingredients

POLYETHYLENE GLYCOL

CAS: 25322-68-3

RTECS: TQ3500000

OSHA PEL N/K

ACGIH TLV: N/K


P-TOLUIDINE, N,N-DIMETHYL-; (N,N-DIMETHYL-P-TOLUIDINE)

CAS: 99-97-8

RTECS: XU5803000

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT. ACUTE:MAYBE HARMFUL BY
INHALATION, INGESTION OR SKIN ABSORPTION. VAPOR OR MIST IS
IRRITATING TO THE EYES, MUCOUS MEMBRANES AND UPPER RESPIRATORY
TRACT. CHRONIC:NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . EYES/SKIN:IMMED FLUSH W/COPIOUS
AMTS OF WATER FOR @ LEAST 15 MINS WHILE REMOVING CONTAMD CLTHG &
SHOES. ASSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE
EYELID S WITH FINGERS. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG GIVE
ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYG. CALL A PHYSICIAN.

Fire Fighting

Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, FOAMS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE.

Accidental Release

Spill Release Procedures:ABSORB ON SAND OR VERMICULITE AND PLACE IN A
CLOSED CONTAINER FOR DISPOSAL. EVACUATE THE AREA. VENTILATE AREA
AND WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE. WEAR
NIOSH/MSHA APPRVD SCBA, RUBBER BOOTS, AND HEAVY RUBBER GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT BREATHE VAPOR. AVOID CONTACT
WITH EYES, SKIN & CLTHG. AVOID PROLONGED OR REPEATED EXPOSURES.
KEEP AWAY FROM HEAT AND OPEN FLAME.
Other Precautions:STORE IN A COOL DRY PLACE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST:FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WASTE DISP METH:TOXIC WASTE. DISPOSAL MUST BE I/A/W FEDERAL, STATE AND
LOCAL REGULATIONS .

Chemical Properties

Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NOT KNOWN
Appearance and Odor:LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
NOT KNOWN.
Stability Condition to Avoid:HEAT.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON MONOXIDE, CARBON DIOXIDE, AND NITROGEN OXIDES.

Disposal

Waste Disposal Methods:COMBINE THE ACCELERATOR WITH LR WHITE RESIN
(CAT. 17411) IN WELL VENTILATED CNTNR SUCH AS A BUCKET. THE RESIN
WILL CURE W/LITTLE FUMING. PLACE IT IN FUME HOOD/OUTSIDE UNTIL
COMPLETE. THE COOL RESIN IS HARMLESS & MAY BE DISPOSED OF WITH
NON- (SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.